PATIENT CHAIR Pleion
Synthesis expressing functionality and considered investment.
Chair has synchronized movements, a proper backrest fulcrum, multi jointed leg-supports, a rotating base and a progressive brake with foot-control.
These benefits enable the chiropodist to work with good body posture and at the same time allow the patient to be relaxed and comfortable.
15 mm thick steel base, treated against oxidative stress and covered with an ABS casing with embossed stain-resistant finish. Structure, entirely made of steel treated against oxidative stress, mounted on a 350° rotating element with Torlon® ball bearings, covered with high-strength ABS+PMMA casings. Fasteners: all made of high-strength Stainless steel.
350° rotational movement of the structure on the base.
Progressive swing brake via foot control.
Pantograph-like vertical synchronized with the longitudinal tilt (up to 30°, trendellenbourg).
Minimum seat height 510 mm, maximum 870 mm.
Rated lift load 160 Kg.
Movement of backrest angle 75° (from -15° up to -90°).
Articulated leg rests ( 30° -30°) mounted on telescopic slides with travel equal to 200 mm, tilting and vertically lift able according to an angular width of 90°, perfectly vertical to the ground when at rest. Maximum height reachable 1.340 mm.
Wide angular travels, allow the chair to be configured so as the backrest, the seat and the leg-rests are arranged on an ideally horizontal plane.
The pleion X chair is equipped with the same features of the pleion S model, but evolves with: upholstery with greater thickness and softness, two-tone upholstery, rated lifting load 190 kg, automated recall of configured memories, wireless system, Single Touch function.