laboratory LAB X1
Exclusive system for the roughing and grinding of any ortho podiatric material.
The total absence of dust exiting the operating zone, makes LAB-X1 one of a kind. By blocking expansion into the air of even the finest dust, it prevents the operator from inhaling harmful dust that, even with powerful suction systems, is not completely captured.
The decantation of "polluted" air inside the LAB X1 allows all smoothing residue to be conveyed into a spacious collection container. The morphological characteristics of LAB X1 allow its placement within the podiatry cabinet.
Electrical and mechanical safety of the operator is ensured by activating the grinder with a foot control, which allows the grinder to be stopped at any time and, in the event of a power failure, acts as an anti-reset device. The shatterproof glass not only gives excellent visibility but it also acts as a safety screen for the user.
The powerful neon lamp inside the box, protected by glass, ensures excellent visibility all over the working area.
Dimensions of the operating area, allow easier working, even on considerably large arches.
The advantage of not having suction motors considerably cuts down on noise levels and reduces running costs by 60%-70%.
Rubber expansion wheel, 100 mm wide.
Rubber expansion wheel, 30 mm wide.
Self- locking chuck.
Abrasive wheels for finishing.
Brush to remove dust.
Grinder speed: 3.000 r.p.m.
Grinder power: 500 W.
Overall input: 550 W.
Dimensions (Height x Width x Depth): 147x90x48 cm.
Kit of 5 pcs. Abrasive rings coarse grind (40), 100 mm wide
Kit of 5 pcs. Abrasive rings fine grind (60) 100 mm wide
Kit of 5 pcs. Abrasive wheels for finishing.
Kit of 5 pcs. Abrasive wheels for finishing (with abrasive insert)
Kit of 5 pcs. Abrasive rings fine grind (60), 30 mm wide