PATIENT CHAIR Arcadia
Synthesis of elegance and comfort
The chair that has most characterized Stern Podia production, becoming emblem of great performances and elegant linear design. The great angular displacements allow the chair to be positioned so that the backrest, seat and leg-rests are all placed on an ideally horizontal plane.
4 models available
- with double powered legrest
- with double mechanical legrest
- with single powered legrest
- with single mechanical legrest
15 mm thick steel base, treated against oxidative stress and covered with an ABS casing with embossed stain-resistant finish. Structure, entirely made of steel treated against oxidative stress, mounted on a 350° rotating element with Torlon® ball bearings, covered with high-strength ABS+PMMA casings. Fasteners: all made of high-strength Stainless steel.
350° rotational movement of the structure on the base.
Progressive swing brake via foot control.
The NEW SINGLE TOUCH PEDAL allows to manage in a wireless and easy way up to 5 chair movements, depending on the chair model, to rapidly reach any desired position. It is equipped with three independent memories to recall the stored positions, plus the return to the initial position button.
The single touch system allows to activate the different movements with just a single pressure on the control buttons, to optimize comfort and performance.
Pantograph-like vertical movement with the seat at least 520 mm high, ergonomically favoring the approach to the patient and his discharge, with a maximum height of 880 mm. Rated lifting load 220 kg.
Movement of backrest angle 75° (-15°, -90°).
Movement of longitudinal tilt (trendelenbourg ) 32°.
All movements of the chair are activated with the Single Touch function.
In reaching a stored position all movements take place in sync, ensuring a fast response to the control.
Safety system that can be activated by the patient by pressing two red buttons placed on the sides of the seat. When activated, the system allows the immediate stop of the chair automatic movements.
Articulated leg rests with angular width of 30° -30°, mounted on telescopic slides with travel up to 300 mm, tilting and vertically lift able with an amplitude angle by 90°, perfectly vertical to the ground in the rest position. Maximum height reachable 1.340 mm (Extra slide system).
Coaxial armrests with variable height with respect to the seat, in sync with the backrest angle. The parallelism between the armrests and seat is kept constant under all operating conditions. Because of operational requirements for clearance, coaxial lifting sets the vertical position of the armrests in correspondence of the backrest.
Upholstery in integral PVC that ensures maximum fabric resistance and elasticity. AVAILABLE WITH BICOLOR UPHOLSTERY