Last generation thermoforming machine controlled by a microprocessor, which allows the use of 7 different programmes, all of which can be personalised and stored.
Equipped with a digital display to visualise all the parameters and a multifunction keyboard for the easy setting and control of the following functions:
- temperature (heating)
- time of exposure to heating
- vacuum (pressure)
- time of exposure to pressure
The programmed sequence combination of these functions and the audio and visual signals
make the T-FORM X2 unique and easy to use.
Equipped with a push-button/foot-pedal control for the vacuum (pressure), it is perfectly adapted also for taking footprint readings directly on the foot of the patient through a nylon bag.
Oil vacuum pump (separate) adapted for continuous use: vacuum capacity 2 mbar (vacuum percentage: 99,8%), equipped with filter and check valve.
Heating surface equipped with 1200 Watt resistance, protected by a breathable material in fibreglass and Teflon; maximum obtainable temperature 250°, adapted for processing carbon laminates.
Silicon membrane resistant to over 300°, easily replaceable.
Technical data:
Electrical supply: 230 Vac – one-phase/50Hz
Total electrical input: 1700W
Working temperature: 40-240°C
Machine weight: 15 Kg.
Vacuum pump weight: 4 Kg
Dimensions:
Work surface: 285mmx340mm
Thermoforming machine: 520mmx520mmx
130mm(H)
Vacuum pump: 194mmx320mmx
182mm(H) |
